This model is universal and can be used left or right handed.

The 1000 Series by Sentry Safety is surface mounted. The panic bar will be placed on the rear face of the door. The strike goes on the door frame behind the door, not on the inside of the frame where you may have previously had a handle. If the door has a handle that will need to be removed. Caps are available for the hole left behind after the handle is removed. Door jamb brackets are also available to cover where the old handle latched to the frame. Mounting bolts are provided however depending on the material of the door you may switch to the same diameter in wood screws, self-tapping metal screws, or for added strength - sex bolts. (Sex bolts have a female side on the outside of the door and a male side on the inside of the door and then they join in the middle of the door. Since both faces of the door are used for securing the bar it makes for a secure hold.)

Works with Sentry Safety Handles ONLY

Take a look at our selection of Door Handles Here

_______________________________________________________________________________________________________________________

 Where to use this panic exit bar:

• Glass doors with a stile (metal frame) of at least 2" or 4" if using an outside handle.
• Steel, wood, and composite solid face doors
• Doors with a maximum width of 38.25"
• Doors with a maximum thickness of 3 3/8"
• Any door usage frequency
• Single doors, dual doors with mullions, dual doors without mullions when paired with a 120 Series Panic Exit Bar

 Where NOT to use this panic exit bar:

• Not UL certified, don't use if UL certification is needed for inspection. Click here for UL rated bars
• Not fire rated, not to be used on a fire break. Click here for a fire rated bar
• Cannot release a magnetic door lock, if the door is held locked by a magnetic lock do not use this panic bar. Click here for a micro switch panic bar
  
  

QB ID: DK-350